If there is no operation for 30 seconds, screen will turn off. Then press the fire button for 1.5 seconds to save the setting and go back to the customization mode. And press fire button shortly time will cause the device go into the next 1-second-adjustment. Press up and down buttons simultaneously to make adjustment manually. Instruction after the device getting into the customization interface: Under Temperature Control Customization Mode interface, the right corner will show the adjusted temperature control value.) (Under Power Customization Mode interface, the right corner will show the adjusted power value. And the function only works under Customization Mode. Quickly press fire button 4 times, the device will go into the second Customization Mode. Press up and down button, Mode Ml to MS can be sequentially switched.ī. Stable Power (W) Mode, Temperature Control Mode: TC-SS316/TC-Ni200/TC-Ti.Ī. Under Customization Mode, Press fire button 3 times continuously, 4 kinds of Customization Modes can be switched sequentially: Press up and down button to choose the Customization Mode and press fire button to go into Customization Mode Interface. Press up and down buttons simultaneously for 1.5 Seconds, the device will go to the function menu Interface. The Selection under Power Mode Interface: When you finished the adjustment, press fire button 1.5 seconds, the device will return to working interface.Ī. You can make the adjustment according to pressing up or down button simultaneously. Press the fire button to make confirmation and go to next step. Press up button or down button simultaneously to choose the function. Press up and down buttons simultaneously for 1.5 seconds, enter the function menu Interface. Press fire button and down button at the same time for 1.5 Seconds, the screen will flip. Under the locked Mode,”UP” button, “DOWN” button and “FIRE” butons are not available, Combination Key for operation is okĬ. Press the up and fire buttons simultaneously will unlock the device. Press fire button and up buttons at the same time for 1.5 Seconds, it will be locked. Press up and down buttons at the same time for 1.5 Seconds, the device will enter Function Menu Interface. You can switch between voltage and wattage modes in the function menu. The device can automatically recommend an optimum voltage for your atomizer’s resistanceĭ. Voltage regulation: 0.5~7.5V adjustment step: 0.1 V. Resistance range under Super Mode is 0.1-0.30Ĭ. The device can match the right power according to the value of resistance automatically.ī. Check the display as shown below:ġ30-157W is Super Mode, each step is 1watt. The adjustable wattage is SW to 80W.ĥ- 129W is normal mode, each step is 1 watt. Then you will see the letter “W” is flashing. Quickly press fire button 4 times can get into wattage adjustment interface. When temperature was set to 200F, keep on pressing the down button, temperature will turn to 315℃
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |